M.2 B-key SSD and SATA III Port HDD PCI-e x1 Card with RAID – SI-PEX50065

M.2 B-key SSD and SATA III Port HDD PCI-e x1 Card with RAID - SI-PEX50065

Part Number: SI-PEX50065 Brand: IOCrest

Marvell Chipset: 88SE9130. Supports RAID and HyperDuo Mode.

HyperDuo uses intelligent algorithms to automatically migrate hot data to SSD while enabling all data to be safely stored on a larger capacity SATA hard disk drive (HDD).

Compatible with SATA I, II, III. Serial ATA Specification Revision 3.2. Maximum 6Gbps

Hot Swap, Port Multiplier Compatible, and NCQ Supported on the SATA III port.

Support M.2 B-Key card size: 22*30 22*42 22*60 22*80 22*110

Note: Support M.2 (NGAFF) SATA SSDThe efficiency mainly depends on M.2 (NGAFF) SSD master IC and the size of the capacity

The SI-PEX50065 PCI-Express 2.0 x1 SATA III + M.2 Controller Card enables one SATA III HDD and one m.2 SDD to be added to a computer through a PCI-Express 2.0 x1 slot. Featuring Marvell Hyper Duo technology, takes the advantage of the rapid respond of a solid state drive (SSD) and the spacious capacity of a hard disk drive (HDD), to form an ultimate total solution for a high performance, cost effective and large storage system. Hyper Duo uses an intelligent algorithm to automatically migrate the most frequent access data on the SSD, while all the rest of the data are safely kept on the hard disk.
OS SUPPORTED:
All Windows OS
Package Information

Package Dimensions: L 7.00 × W 5.50 × H 1.50 in
Package Weight: 0.30lb
UPC: 810154017188

Package Content
  • (1) PCIe to M.2 and SATA 6G card
  • (1) Driver CD
  • (1) User Manual
  • (1) SATA data cable
  • (1) M.2 Screw set
  • (1) Low Profile Bracket

PC Motherboard with PCI-Express x1 Card Slot or Larger

TYPE OS LANGUAGE VERSION FILE
Techincal Question
If you have any technical questions or need troubleshooting please contact us here
General Inquiry

Please describe your question below and press the submit button. Our Syba team will reply as soon as possible.