CATEGORIES
- New Products
-
IT PRODUCTS
- Cables & Adapters
- DVI / HDMI / Display Port Cables & Adapter
- External Multi-Bay HDD Enclosure
- Firewire Controller Cards
- Front Panel I/O
- Hard Drive Mobile Rack
- HDD Docking Station
- HDMI Capture Card
- Internal Sound Cards
- KVM Switches
- Legacy I/O Card
- M.2 Enclosure
- M.2 To PCIe Adapter
- Memory Card to SATA / IDE Adapter
- mSATA / M.2 To SATA Adapter
- Networking Cables
- Networking Devices
- Port Blockers
- Repair Tool Kits
- Riser Card
- SATA Controller Card
- SATA Data / Power Cables
- SATA RAID Controller Card
- U.2 SFF-8639 PCI-e / M.2 Adapter
- USB Cables & Adapters
- USB Controller Cards
- USB Legacy Adapter Cable
- CE PRODUCTS
- INDUSTRIAL/SERVER
BRANDS
PCI-E x1 to Powered x16 Riser Adapter Card USB 3.0 Extension Cable - SI-PEX60017
SI-PEX60017 board with 4 holes available on PCI-E 16X side to fix PCI-E 16X connector on motherboard for more convenient management for graphics card. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Molex 4 pin power connectors available for more stable operation for graphics card while mining. Install PCI-E 16X device to PCI-E 1X slot freely according to dimension, position of motherboard and case. One end is PCI-E 16X female and another end is PCI-E 1X male. OS SUPPORTED: No Content.
4 port PCI-E x1 Transfer adapter to Powered x16 Riser Adapter Card USB 3.0 Extension Cable - SI-PEX60018
Effectively solve your motherboard PCI-e interface lane shortage by using this PCIe Adapter card which can extend out to support 4 Riser cards. Please DO NOT fill all four slots at one time as you need test the speed on your motherboard because this 4 in 1 adapter has a higher performance requirement for motherboards. Start by testing the speed inserting one card then the next card until you notice a speed decrease/drop and remove that card and leave the remaining cards as that will be the maximum number of supported cards for you system. Our test set up…
1 to 2 Ports PCI-E x1 Extension Board Switch Multiplier Hub Riser Card with USB 3.0 Cable - SI-PEX60016
This PCI Express card can expand one PCI-E x1 interface to 2 PCI-E interface x1. It can be plugged directly into the motherboard interface. The USB interface corresponds to the current USB 3.0 standard with a maximum transfer speed of up to 5Gb/s. OS SUPPORTED: No Content.
